Online courses

I discovered the Eurocode Steel Design course just as I began designing steel structures on my own after changing jobs.

Thanks to it, I finally grasped the details behind choosing section classes and phenomena such as buckling, lateral–torsional buckling, and much more – not from a purely theoretical standpoint, as in university, but through practical examples that effectively structure the knowledge. Even though I still have a lot to learn, I feel way more confident when designing. I can fully recommend this course!

Remigiusz Borejko
Structural Engineer, Poland

It is a great pleasure to learn so much in a short time, and above all to develop a certain good engineering judgement based on critical thought, good advice from the experience and being systematic about benchmarking my own FEA tools in order to obtain practical results.

This all has helped me to gain a lot of confidence in my own capabilities and new skills, but as well to develop a way of facing future uncertainty in structural design based on evidence, comparison, proven references and knowledge of the codes.

Enrique Quesada
Spain

Eurocode Steel Design – Part 1: Members” course created by Łukasz and the Enterfea Team exceeded my expectations. I had previously gone through the “Breakthrough FEA Course” and knew how high a level I could expect from Enterfea’s training materials. However, this course not only covered all the most important things you should pay attention to when designing steel structures, but the bonus materials also show in a simple and clear way where the Eurocode formulas came from, which gives you a much better understanding of the entire design path of structural elements. I recommend this course to anyone who wants to design safely, economically, and with a full understanding of what is behind the sometimes not very intuitive Eurocode formulas.

Konrad Kaczmarek
Structural Engineer/FEA Engineer / Great Back Office / Poland

This course will increase your understanding of how structures really work and give confidence in your nonlinear FEA designs. Example problems are practical, which you would actually encounter in your professional career – unlike many university FEA courses. Your knowledge is tested with a quiz after every topic. Especially for someone designing metallic structures, this course provides great value.

Aatu Rankinen
Managing Director / Rancon Oy / Finland

The course is an invaluable resource of knowledge from the perspective of a mechanical engineer, it allows you to smoothly enter the construction industry and understand the calculation methodology of Eurocodes.

I recommend it especially to engineers from other industries who want to understand and learn how to design structures.

The course does not only teach Eurocodes, but allows you to understand what is critically important when designing steel structures and this is the biggest advantage of this course!

Błażej Mazurek
Deputy Head of Technical Department in DrM Polska

This course on designing beam structures according to Eurocode is far more than a step-by-step guide through the standard.

It builds a deep understanding of structural behavior. Its practical focus makes it highly valuable not only for civil engineers but also for professionals in related fields.

A great choice for anyone looking to truly grasp beam design, not just follow procedures.

Jakub Drozdowski
Hull Structure Designer, NavArt, Poland

When I started this course I was shocked that you can actually make the Eurocodes sound interesting.

This course offers a great combination of a condensed overview of the code procedures and in-depth explanations of the underlying physical phenomena.

This was without a doubt the best investment I ever made, given the great value for money of this course.

Reinis Bļodnieks
Mechanical engineer, Liebherr-France SAS

Excellent course spanning from basic concepts to advanced topics in a way that only someone with deep knowledge, professional experience, and ability to teach, such as Lukasz, can offer.

I’ve enjoyed how theory is connected to normal practice in a plain and fun way. I’m already waiting for the following parts. Thanks!

Ramon Freixes
Structural Engineer, United Kingdom

The course explores stability phenomena and addresses warping — considered the 7 DoF in particular detail as a key variable in determining critical moment.

Theory is combined with a parallel practical case study so that you can gain an in-depth understanding of your software’s output results.

If you want to understand steel structures, take this course.

Diego Fernández
Structural Engineer, COSERMO, Spain

Eurocode steel designing course is another great compedium from Enterfea.

It is complete guide to proper design steel structures according to European standards.

I am a student of all of Łukasz`s courses and I highly recommend them.

Waldemar Zioło
Structural Engineer, Owner Konstrukcje Budowlane Waldemar Zioło, Poland

A solid refresher on design basics, plus some fresh insights into the second-generation Eurocodes.

The instructor knows his stuff and is super easy to talk to – always ready to answer questions in detail.

Definitely worth checking out if you want to brush up on Steel Design.

Kamil Prawniczak
Steel Structure Engineer, Norway

With the course, You will learn the main concepts of the Eurocode for Steel Structures in a very intuitive and well-structured way.

The course provides you with a clear understanding of the standard’s main concepts. This will undoubtedly reflect in the quality of your projects and allow you to spread your wings in the steel structure design market.

Edson Gusmões
Specialist Engineer II, Brazil

As usual, the content provided by Łukasz and his team was excellent.

Even though I am an ‘outsider’ when it comes to Eurocode and this kind of structural design, I did not feel out of place thanks to the in-depth and thoughtful explanations of every subject.

I highly recommend this course.

Sebastián Sosa
Mechanical engineer, Integral S.A, Colombia

You will acquire the skills to design individual compressed or bent steel members in non-sway steel structures comprehensively.

The lectures, which are essential and well-explained, cover global and local stability of structures in depth.

Additionally, you will learn to use Linear Buckling Analysis to calculate buckling lengths of compressed members and the critical bending moment in bent members effectively.

Eemeli Tikkanen
M.Sc. Eng, Responsible Structural Engineer, Sweco Finland

In my opinion this course is a fundamental, and rock foundation for every young engineer.

It contains a very detailed and systematic explanation, with enormous desire and will of the lecturer.

According to the lecturer, we must try not to be ” victims of our software “.

Stefan Narić
Civil Engineer / IG Banja Luka / Bosnia and Herzegovina

This is a solid introduction to steel member design using Eurocodes, tied together by an interesting and practical example structure.

Each step of the design process is explained clearly and thoroughly.
Highly recommended for beginners or those looking for a refresher.

Mike Beaumont
Senior Structural Engineer / Sedgman Onyx / Australia

The course content is presented in a very clear and accessible manner. The topics are structured logically, forming a coherent whole. It offers a fresh and insightful perspective on interpreting Eurocode provisions.

Personally, I am truly impressed. Even though I’m a beginner, the course has significantly accelerated my understanding and application of the Eurocodes.

I’m very satisfied with the purchase, and I wouldn’t hesitate to enroll in future courses.

Mateusz Gęślicki
Facade Designer and CAD Software Developer (C#), Poland

Finally!!… straight-forward, practical explanations of FEA concepts that ACTUALLY MAKE SENSE!
I wish I had taken this course years ago. It would have saved me tremendous amounts of time!

As a bonus, the course is also entertaining and fun. Highly recommended!

Megan Walker
Ph.D. researcher, Netherlands

The course was extremely valuable and practical. It helped me strengthen my understanding of FEA and structural behavior, while giving me more confidence in applying realistic boundary conditions, interpreting results correctly, and judging the reliability of FE models.

What I appreciated most was the practical engineering approach, not just theoretical explanations. The content was clear, well-structured, and directly applicable to real engineering projects and daily design work.

I also highly appreciated the support from Łukasz Skotny. He answers questions clearly and follows up very well, which makes the learning experience even more effective and professional.

Philopater Kozman
Senior Design Engineer in PERI, Malaysia

This course replaced Netflix for many evenings and was probably more entertaining!

Its easy-going atmosphere was much needed and a refreshing change in the world of structural engineering.
Needless to say, it didn’t take any of the educational value away! I would add that I am a civil structural engineer and I am already using a lot of what I learned in my practice.

I definitely encourage taking this course if you are in any way involved in FEA. Thank you for a great experience, l am looking forward to more!

Adam Fiala
Civil Structural Engineer in Q-PARS, Czech Republic

Throughout this course, you’ll learn everything you need to know about nonlinear analysis in FEA, which is not taught in any textbook.

Starting with the most basic concepts, neat explanations, examples, and amazing challenges you will have all the tools to spread your wings in FEA and boost your career.

Edson Zofrea Gusmões
Civil Engineer, Specialist Engineer II, Brazil

I definitely recommend Łukasz’s course. It has a lot of easy-reading content and practical examples that explain major concepts of nonlinear analysis.

This kind of plain and understandable explanation you won’t find in any scientific book. I can honestly say it helped me to develop my structural engineer career.

Jakub Drozdowski
Hull Structure Designer, NavArt, Poland

Łukasz is one of the most passionate FEA analysts and a humble person I have ever seen.

Anyone can tell his passion for nonlinear FEA through his online courses and blogs, and most importantly he is always there to clear my doubts.

Tontanga Kothilngam
WEBS SYSTEM KOREA, Republic of Korea

The definitive training course for non-linear FEA. This course comprehensively covers how to approach non-linear static analysis in an easy to understand and fun manner.

The lessons are well written and engaging and are complemented by a large number of practical example problems. Highly recommended!

Mike Beaumont
Senior Structural Engineer / Onyx Projects / Australia

A beautifully crafted experience for structural engineers who really want to understand the nonlinear effects and their interactions

If you want to be an expert in FEA Design and engineering in general, there is just no way around this course and Łukasz’s work in general.

The methods of teaching the concepts are revolutionary and deliver the knowledge in a way, that it’s just fun to learn and it really sticks.

Stefan Pumberger
Structural Engineer, Austria

This class offers clear guidelines that have made me more confident in the choices I make when using non linear stress analysis.

The combination of clear explanations and worked examples makes this course extremely valuable for practicing engineers.

I was able to use the skills learned in the course to get an experienced structural engineering position in a fascinating field.

Brian Mathews
Taylor Power Systems, United States of America

I can say without a doubt that Nonlinear FEA Masterclass is well worth the time and effort.

The way the course is structured has allowed me not only to think about (and really understand) the basics of the physical concepts that underlie this type of analysis, but also to learn the proper way to translate that knowledge into a real, reliable result from an FEA.

Each topic is very well developed, in a clear manner and with enough depth to enable students to relate these complex concepts to real life applications. You can really see the effort that has gone into making this course, which was much appreciated and helped to maintain a high level of engagement from lesson to lesson.

Sebastián Sosa

Łukasz’s approach to sharing knowledge about difficult matters proves his deep understanding of the subject.

It makes it easy to approach a non-linear FEA without worrying about overwhelming formulas and “smart” words.

There are many very well-presented examples to „learn by doing” with tricky tests, during which you can verify your own progress.

Artur Dziuda
Structural engineer, Altum, Poland

If you want to play a role in structural engineering, you need FEA. The Breakthrough FEA Course is the right place to start the adventure.

The secret ingredient of the course is Łukasz, he has an amazing teaching style, he is an FEA Master, and he really makes the difference. There’s no better way to learn FEA.

Claudio Curreri
Mechanical engineer at Italgru S.r.l, Italy

Nonlinear FEA Masterclass is an advanced course that gives you theoretical and practical knowledge to solve real complex engineering problems using numerical simulation.

The secret ingredient of the course is Łukasz, he has an amazing teaching style, he is an FEA Master, and he really makes the difference. There’s no better way to learn FEA.

Claudio Curreri
Mechanical engineer at Italgru S.r.l, Italy

Highly recommend the Breakthrough FEA Course and Nonlinear FEA Masterclass, especially to structural or mechanical engineers.

Both are extensive courses containing explanations for each of the key sections involved in FEA design with examples.

I began the breakthrough course 2 years post-graduate with minimal experience in FEA design. Following completion of the non-linear course, I felt confident enough to correctly model, interpret and validate results.

Jayden Cook
Structural Engineer at Wave International, Queensland Australia

Applying knowledge from the course I already found errors in my modeling and the results of the calculation.

I was always relying upon the result of the solver and trusting it so much… But double-check in manual simple calculation can save you also from trouble. Thank you so much for sharing your experience and knowledge in FEA.

10 thumbs up.

Jesus Susmerano Arocena
Rigging Specialist at Chiyoda Corporation, Japan

Great course!
Real examples allow you to understand how everything works in the real world without complicated math.

After a brief reading of articles from Lukasz, I immediately made a decision to get the Breakthrough FEA course to dive into the exciting world of finite element analysis.
I have already applied received knowledge in my daily work with great success.

I am very much looking forward to getting new courses from Lukasz!

Stanislav Ragozin
R&D Engineer, PERI, Hong Kong

I thought I had a solid knowledge of designing steel structures using FEA because I believed it was just comparing the stresses found in the FEA analysis with the yield strength of the steel.

In 2019 I came across the Enterfea blog. From that day on, I started following all the posts and decided to enroll in the Breakthrough FEA course.

I can say that the course has been a watershed in my career. Now I can say that I have developed solid knowledge in FEA analysis. The course is remarkable and has taken me to another level.

Edson Gusmões
Specialist Engineer II, Brazil

Your course is amazing and this is exactly what I was looking for.

It is conceptual, practical, and application based. It’s not mathematical and theoretical.

Honestly, you have a very good, cheerful personality and that’s why sessions are highly interactive 🙂

Apurba Deka
Advanced master's student, France

Thank you for creating this FEA course. I found it very helpful and pretty much exactly what I was looking for.

I am a design engineer manager and though I do not do FEA personally, I am often the point of contact for contracting out these services and wanted to have a better understanding of the process so that I could interact more effectively with my consultants and ensure that we were getting back the results we needed.

Andrew Hill
Design Engineering Manager, Cummins Inc. Canada

Łukasz explains the practical aspects of FEA in a very structured and easy to understand way.

It helps the reader to understand the practical FEA in a very simple manner.
I highly recommend his FEA course to anyone who is looking to enter into the field of FEA simulations and modeling.

Bogdan Chivulescu
Mechanical Engineer at March Consulting Associates, Canada

I’m currently working with aerospace product development, and I have to use FEA tools almost every day at my job. I’ve already followed your articles on LinkedIn, but now I started your course and I’m writing to say how excellent the content is. You have the talent to turn 7-headed engineering monsters into simple and complete content, and I just want to thank you for that!!

Henrique Carvalho
Product Development Engineer/R&D at Akaer Group, Brasil

The course is really interesting, it’s really easy to understand the basic concepts without going deeply into the complicated theory. And the important part for me is, that it’s really funny. Thank you!

Eko Pujiyulianto
Researcher at Center for Innovation of Medical Equipment and Devices, Indonesia